|
Post by michihunter on Jan 21, 2007 12:30:34 GMT -5
Got to say, that bow looks sweet at full draw. The curvature of the limbs is unreal!!
|
|
SPIKER
Site Guru
THE REAPER'S WRENCH
Made In America
Posts: 4,777
|
Post by SPIKER on Jan 21, 2007 18:10:46 GMT -5
Wonder what that price tag says?
|
|
Coca Cola
Board Regular
Formerly, upthere.
Posts: 406
|
Post by Coca Cola on Jan 22, 2007 19:18:21 GMT -5
Hmmm.. In the AT thread some guy said it had a pretty steep draw curve. I am interested though. Looks cool
|
|
|
Post by shaman on Jan 22, 2007 19:24:56 GMT -5
Hmmm.. In the AT thread some guy said it had a pretty steep draw curve. I am interested though. Looks cool I would suspect any 350fps bow will have a steep draw curve. But never having shot one, I'll wait until it hits the local pro shop and go check one out. At those speeds you could certainly do less than 70#s and still get good KE.
|
|
SPIKER
Site Guru
THE REAPER'S WRENCH
Made In America
Posts: 4,777
|
Post by SPIKER on Jan 22, 2007 21:23:14 GMT -5
I've got to be honest, it's not the best looking bow I've seen, my favorite looking being the Diablo. But, I can get over that .
|
|
Coca Cola
Board Regular
Formerly, upthere.
Posts: 406
|
Post by Coca Cola on Jan 22, 2007 21:50:21 GMT -5
I had heard that PSE is usually very good about their IBO rating. I bet this is pretty close to IBO
|
|
|
Post by shaman on Jan 23, 2007 7:48:00 GMT -5
I had heard that PSE is usually very good about their IBO rating. I bet this is pretty close to IBO I am getting 260 out of my PSE with 26" draw, real world. Assuming the average of 10fps for each inch loss, that would put me right up around 300fps real world. Take some stuff off the bow and with bare arrows I would venture it would be close. They say each X-Force will have a label on it with the chrono'd IBO and Pro Shops will be able to verify it for the customer. From the PSE forum: $799.99 Retail for the X-Force
|
|
|
Post by shaman on Feb 5, 2007 19:11:54 GMT -5
|
|
|
Post by shaman on Feb 6, 2007 16:21:26 GMT -5
|
|
SPIKER
Site Guru
THE REAPER'S WRENCH
Made In America
Posts: 4,777
|
Post by SPIKER on Feb 6, 2007 18:02:15 GMT -5
See how the bottom limb kicks forward.
|
|