|
|
Post by Doegirl on Nov 20, 2007 1:34:38 GMT -5
Go with the single blade model, as it has two screws that hold the blade in place.  Even with the bleeder in place on the four blade, that one screw can only take one or two practice shots before it allows the blade to move, and cause the broadhead to wobble...  If your tuning, and don't notice it, it will scew your results..  I just got two new packages of 100 grain 2 bladed broadheads. There is only one screw to hold the ferrule and the blade in place. Design change ?  |
|
|
|
Post by BT on Nov 20, 2007 6:59:50 GMT -5
 This is the one that spiker and I are familiar with. As you can see , there are two screws that are located in the ferrule with opposing locations. Not sure how a single screw could be better. |
|
|
|
Post by Doegirl on Nov 20, 2007 11:55:21 GMT -5
I dissambled one, and the blade has still has two holes. The ferrule only has one. I wonder if this is trully intentional or a lot of heads that slipped past drill press #2 ;D Hopefully this pic will give an idea of what's going on. Maybe a call to Magnus is in order.  |
|
|
|
Post by Doegirl on Nov 20, 2007 12:12:08 GMT -5
I just emailed Magnus tech support and included the same pic I posted here. I'll update with their response.
|
|
|
|
Post by BT on Nov 20, 2007 13:36:41 GMT -5
Thanks....I and they are not on speaking terms at this time Somehow , this will end up being my fault! ;D |
|
|
|
Post by Doegirl on Nov 20, 2007 14:10:32 GMT -5
I sure hope that my post don't cause your problems,BT  Certainly not my intention. I thought about posting this issue on other boards, but I don't want to be regarded as a poop-stirrer.  Let's see what Magnus says first. |
|
|
|
Post by BT on Nov 20, 2007 14:20:39 GMT -5
;D Thanks for the concern but don't even think about it.....this is a broadhead site primarily and nobody has enough weight to change the protection of free speech that is based on fact and opinion based on fact  |
|
SPIKER
Site Guru
THE REAPER'S WRENCH
Made In America
Posts: 4,777
|
Post by SPIKER on Nov 20, 2007 17:26:25 GMT -5
Trilby...just send an email to Magnus...they are a company that stands behind their product....if there is a problem (which it looks like there is..should be two holes in the ferrule)..they will take care of it before you can blink... Their customer support is amazing..trust me... Oops! I see you did that already..  You'll be happy with their response.. |
|
|
|
Post by BT on Nov 20, 2007 21:06:01 GMT -5
Yeah...they are a top of the line outfit I was just funning |
|
|
|
Post by Doegirl on Nov 26, 2007 17:59:41 GMT -5
Well, it's been about a week since I emailed tech support. No response. I assume, by the lack of response, these heads will now sport 1 screw instead of 2. I'm none to happy about this. How can one screw keep that blade from being knocked off center?  It's back to the SST Boss for me. I still want to get a response from someone at Magnus. I posted this issue on AT with the pic. I know the Magnus owner is on that board from time to time. www.archerytalk.com/vb/showthread.php?p=5746443#post5746443 |
|
Certainly not my intention. I thought about posting this issue on other boards, but I don't want to be regarded as a poop-stirrer. 
Let's see what Magnus says first.
It's back to the SST Boss for me.