|
|
Post by BT on Mar 5, 2007 18:30:41 GMT -5
Wanna bet it's a bearing shim  Since you obviously have nothing to lose....why not throw some penetrating lubricant around the cam axles  |
|
|
|
Post by michihunter on Mar 5, 2007 18:33:01 GMT -5
I can tell all of you guys that I have personally heard the noise Spikes bow makes. All the way from NY!!! ( I won't mention it was over the phone ;D  ) It's LOUD. Very LOUD!!! I like my PSE T-Bolt and have never had any troubles with it, but if ANY of my bows had the same problem he's experiencing, and the mfg, was unwilling to extend me the little courtesy they have shown, well I'd be looking for a new one too.  |
|
|
|
Post by michihunter on Mar 5, 2007 18:34:06 GMT -5
BT- Have you heard it yet? It sounds like the double action of a trigger on a revolver!! |
|
|
|
Post by michihunter on Mar 5, 2007 18:39:23 GMT -5
Told ya what it sounds like and he said it's coming from the limb pocket of the upper limb. Funny thing is it will happen at draw right after a shot. But if you draw it and then draw down and try it again, it doesn't do it. |
|
|
|
Post by BT on Mar 5, 2007 18:42:23 GMT -5
Sounds like the pocket is shot or the limb is split under the retainer bolt. Bye-bye riser & or limb |
|
Greg Krause
Moderator
PRO STAFF 1
AKA- Skipmaster1
Posts: 3,990
|
Post by Greg Krause on Mar 5, 2007 18:47:03 GMT -5
That sucks.
Do you have a back up bow?
|
|
SPIKER
Site Guru
THE REAPER'S WRENCH
Made In America
Posts: 4,777
|
Post by SPIKER on Mar 5, 2007 18:49:27 GMT -5
damn Fireflight..I'm going with the Mach X.  |
|
|
|
Post by BT on Mar 5, 2007 18:53:45 GMT -5
I didn't say they were cracked.....I said it sounds like they could be damaged. When I heard it at the techno it was just noticeable. Are you saying it's the same noise but that much louder?  |
|
SPIKER
Site Guru
THE REAPER'S WRENCH
Made In America
Posts: 4,777
|
Post by SPIKER on Mar 5, 2007 19:53:30 GMT -5
Yes, I'm going to rip it completely down tonight and get to the bottom of this!!!  |
|
|
|
Post by BT on Mar 5, 2007 20:24:28 GMT -5
Sounds like a good idea but if it's a crack be very careful with that press or you might finish it for good!.
|
|
) It's LOUD. Very LOUD!!! I like my PSE T-Bolt and have never had any troubles with it, but if ANY of my bows had the same problem he's experiencing, and the mfg, was unwilling to extend me the little courtesy they have shown, well I'd be looking for a new one too. 
