|
|
Post by oldfarmsblueman on Oct 10, 2010 7:51:15 GMT -5
I have a friend who asked me how to clean and shine a
wood and fiberglass bow.I told him I would ask the folks
that had them.Its black and looks a little hazy!If anyone
has some pointers I will pass them along.Thanks!!
|
|
|
|
Post by voodoofire1 on Oct 10, 2010 8:21:03 GMT -5
I use good ol soap and water to remove dirt and grime then if I want it glossy or back to glossy I use a product called "Speedy Metal Polish".....I've used this stuff for the past 15 years on show cars and many other things, it makes paint look so deep that it looks wet, and metal shine like never before, it works great on bows too.......
|
|
smj
Forum Guide
Traditional Council
Posts: 1,819
|
Post by smj on Oct 25, 2010 12:08:11 GMT -5
I'll have to try the Speedy Metal Polish... I just use a good paste wax for hardwood floors. There are several, apply two or three thin coats. As to the cleaning, soap and water. Usually just a damp towel works well, not a lot of water... Don't put the bow in the sink  ! |
|
!