|
|
Post by oldfarmsblueman on Jun 6, 2009 19:05:52 GMT -5
Anyone use them ???likes-dislikes  |
|
|
|
Post by BT on Jun 9, 2009 6:26:18 GMT -5
 SHORT-HIGH PROFILE WITH A PROVEN SHAPE The Fusion™ Vane sports a 2 inch long, high profile, design based upon the increasingly popular foot print of today’s short vane designs but, all similarities end there. With a profile similar to a traditional shield cut, the modified silhouette increases the surface area of the most critical point to the vanes anatomy. This unique design minimizes cross wind interference while maximizing broadhead flight and arrow stabilization. FUSED BASE AND BLADE Two distinctly different proprietary polymers are used to separately create the clear base and colored blade of the vane. They are then “fused” together during the manufacturing process. By employing a soft suction fit base and a durable and responsive, tapered blade, we have created a completely unique flexible, forgiving, and easy to fletch vane that has all the positive characteristics modern archers look for unrivaled flight and accuracy. No cleaning or preparation is needed for Fusion™ Vanes. NO PRIMER ON THE VANE Because our blend of materials requires no primer or any other material on the base of the vane for adhesion, DURAVANES have an unlimited shelf life. |
|
|
|
Post by oldfarmsblueman on Jun 9, 2009 9:48:05 GMT -5
I just ordered 100 to try.I like the blazers but they don't
go on the way I like.I some times have one side that is
not down agenst the arrow.I just read that they have
made a change on this problem but there is a LOT of
old stock out there.
|
|
|
|
Post by BT on Jun 9, 2009 15:15:15 GMT -5
yup...had the same issues
|
|
|
|
Post by snoodslapper on Jun 9, 2009 15:24:31 GMT -5
I like the shield cut; looks nice.
|
|
SPIKER
Site Guru
THE REAPER'S WRENCH
Made In America
Posts: 4,777
|
Post by SPIKER on Jun 9, 2009 17:12:00 GMT -5
yup...had the same issues I swear I don't get it.  I've been fletching Blazers since I learned how to fletch, and have never had a problem with them.  Thank god, it's one of those few things that have gone right for me.  |
|
madoktor1
Board Regular
Fear The Reapers!!!
Posts: 430
|
Post by madoktor1 on Jun 11, 2009 22:21:46 GMT -5
yup...had the same issues I swear I don't get it. I've been fletching Blazers since I learned how to fletch, and have never had a problem with them. Thank god, it's one of those few things that have gone right for me. I agree. I have never had a problem with them either. |
|
jamaltwy
Senior Board Member
just move closer to the cursor!!!! I'm in for the kill!!
Posts: 1,084
|
Post by jamaltwy on Jun 13, 2009 14:53:37 GMT -5
I did with camo one didn't adhere good atallbut they were the only ones!! of course it was gift set i made for family member.......
|
|
|
|
Post by bowhunter44 on Jun 14, 2009 11:22:52 GMT -5
I have shot the fusion vanes some. I couldn't get them to group with broadheads as well as Blazers....
|
|
