Shaft Selection and Software Help

[aclakey]

I am looking to go back to ACC arrows again and am having a tough time choosing a shaft. The TAP software recomends the ACC 3-60 shaft at 27" as a perfect match. The OnTarget software recomends the ACC 3-49 shaft at 27" as a perfect spine match for my setup. I have entered the data for my bow as best as I could in both software applications. All measurments were real world using a chrono. My setup is as follows.

2001 Hoyt Vortec Saber Cam 37" ATA, 7.375" BH
29" Draw
70lb draw weight
Peep, Loop and 2 leaches on string
Trophy Taker Fall away
125gr tip, crested, (3) 3" blazers

Any thoughts or recomendations?

[BT]

sorry....no help from here.

[CopperHead]

Try comparing it to the easton chart. Here is a link to one at bass pro.

www.basspro.com/webapp/wcs/stores/servlet/CFPage?storeId=10151&catalogId=10001&langId=-1&appID=83&cmid=OLEASTONARROWCHART

The bad thing about software is that the software is only as good as the information that is provided to it. As you can see it differs from vendor to vendor. So try the manufactures recommendations first and go from there is the only advice I can offer.

I sleected a single or hard cam, mainly look at the IBO numbers, 125 grain head and 70 to 76 lbs and got the 3-49.

You have more information than I do so you may want to go and give it a try. Hope this helps some.