Tiller measurement

[oldfarmsblueman]

I now my bow is shooting great but when I
measure the tiller its off.To day I read something
and found out I was doing it wrong.I was going
from the string to the limb .After reading I used
a peace of fishing line and made a line from cam
center pin to wheel center pin .It was dead nuts
Some day I'll get this all figured out

[SPIKER]

That is the way to go....you have it right....this pic is to demonstrate where you should measure to on the bow

[BT]

If you have a framing square or a T square, the easiest way is to place the square against the inside limb where it meets the riser and then check the measurement at the string.