Post by BT on Aug 19, 2007 9:32:16 GMT -5
As many of you are aware , the Bunker Buster will not adapt to a crossbow bolt 
But ..... I had to find a way to do the Summer shootout with this broadhead
My solution was to cut the shaft behind the insert and replace that insert with a 3" section of carbon express that had an insert in it.
The 200 shaft fit into the magnum bolt perfectly
I would suggest going down to the local archery shop and asking for an assortment of cut offs and find what works for your bolt
Use a 2 part epoxy and coat the standard shaft exterior , then slide it into the bolt leaving 1" of that standard shaft exposed.
Now you can use the Bunker Buster
But ..... I had to find a way to do the Summer shootout with this broadhead
My solution was to cut the shaft behind the insert and replace that insert with a 3" section of carbon express that had an insert in it.
The 200 shaft fit into the magnum bolt perfectly
I would suggest going down to the local archery shop and asking for an assortment of cut offs and find what works for your bolt
Use a 2 part epoxy and coat the standard shaft exterior , then slide it into the bolt leaving 1" of that standard shaft exposed.
Now you can use the Bunker Buster
