Post by firenock on Sept 2, 2011 22:15:39 GMT -5
Firenock use compression fitting nock or dual O-ring based nock to fit into shafts. Both approaches allow you to pull the nock and reinsert it. With these design you can even tune the bolt easily by turning the nock. For your information, Firenock make the most complete line of nocks to fit ALL cross bow and crossbow bolts (except the FMJ) to date. Below are picture of all our crossbow nock offering. Please note that the nock and circuit are field removable. So if you do not shot a lighted nock, the nock alone is what you should use.
Half moon
Tac arrow and crossbow with 0.157" to 0.167" serving
Ten point, excalibar
Crossbow that has 0.147" to 0.157" serving
Scorpyd and crossbow with 0.137" to 0.147" serving
In line crossbow and crossbow with 0.115" to 0.125" serving
I just receive a reasonable shipment of the Firenock Q and J nock. Jim at Scorpyd should got his plain Q nock in no time. That is, if you want them, they are available NOW. All of them are already on Firenock's web store and we will have more coming anticipating that the first shipment will not last. Below is what the Q style nock looked like in nock pack and Q3 pack. And YES, the Q nock 3 packs comes standard with extreme shock end caps and 3 spare nocks but with no match weight. I would never attend to use Firenock in a Scorpdy without extreme shock end cap installed. And any matched weight is just going to fly out and damage the shaft on impact. The Scorpyd bow is just scary fast and powerful. A reminder, the Q nock use the same extreme shock end cap system (installation tool) as the Firenock F style nock, which is 3 mm shorter than that of a C style nock. So if you had C style Firenock installed, the end cap is 3 mm too shallow for Q style to work properly!
Half moon
Tac arrow and crossbow with 0.157" to 0.167" serving
Ten point, excalibar
Crossbow that has 0.147" to 0.157" serving
Scorpyd and crossbow with 0.137" to 0.147" serving
In line crossbow and crossbow with 0.115" to 0.125" serving
I just receive a reasonable shipment of the Firenock Q and J nock. Jim at Scorpyd should got his plain Q nock in no time. That is, if you want them, they are available NOW. All of them are already on Firenock's web store and we will have more coming anticipating that the first shipment will not last. Below is what the Q style nock looked like in nock pack and Q3 pack. And YES, the Q nock 3 packs comes standard with extreme shock end caps and 3 spare nocks but with no match weight. I would never attend to use Firenock in a Scorpdy without extreme shock end cap installed. And any matched weight is just going to fly out and damage the shaft on impact. The Scorpyd bow is just scary fast and powerful. A reminder, the Q nock use the same extreme shock end cap system (installation tool) as the Firenock F style nock, which is 3 mm shorter than that of a C style nock. So if you had C style Firenock installed, the end cap is 3 mm too shallow for Q style to work properly!