|
|
Post by oldfarmsblueman on Nov 17, 2009 8:19:26 GMT -5
If the chart says 46-51#=100's abd 52-57#200's and I shoot 51-53# is there a way to figure or just try both  |
|
|
|
Post by BT on Nov 18, 2009 13:46:44 GMT -5
If the chart says 46-51#=100's abd 52-57#200's and I shoot 51-53# is there a way to figure or just try both Personally? ... I would use a 75gr. head on the 100 or a 100-125 on the 200. Without trying all combos, I would start (and probably end) on the 200 with the 125gr. head. .... depending on the finished FOC which I would want at nothing over 12% jmo |
|
Konrad
New Member
The Constitution is Not a Suicide Pact.
Posts: 32
|
Post by Konrad on Apr 29, 2010 9:42:29 GMT -5
www.eastonarchery.com/products/selectionUse the above link to Easton Technical Products Shaft Selector program. You plug in your numbers and it shows you which shafts to use. Works like a champ and you can experiment by changing parameter until you go blue in the face. PS The information is really excellent. If you still have questions, the tachnical department will answer within about a day.
|
|
