|
|
Post by Buckshot06 on Jan 18, 2009 23:37:39 GMT -5
I found this while looking for something totally different. I don't agree with all that is said  . I am not sure if this will help but read through the chapters and I found it interesting. I think it does relate to what is being said here. You can also go to the top and start from chapter one. www.huntersfriend.com/2007-Carbon-Arrows/arrow-selection-guide5.htm |
|
|
|
Post by BT on Jan 19, 2009 9:53:28 GMT -5
This is a very good visual chart page Buckshot6  |
|
|
|
Post by Doegirl on Jan 19, 2009 22:20:44 GMT -5
Well, I just ordered the components necessary to make my rig "Ashby Approved". 160gr Grizzly Broadheads w/ 42 grain long adapters, and 8 gpi weight tubes for Axis arrows. This should get me very close to 700grains and an FOC around 20%. I'll verify the stats when the components come in.
|
|
royden
Senior Board Member
Posts: 1,349
|
Post by royden on Jan 19, 2009 22:26:20 GMT -5
did you grab some 2 and 4 grn/in weight tubes while you were at it? ... just in case your arrow doesn't have enough loft to make it 30 yards .... :-/did I say that?  ;D ;D Seriously ... though weight tubes are a good way to play with various options. |
|
smj
Forum Guide
Traditional Council
Posts: 1,819
|
Post by smj on Jan 20, 2009 0:23:23 GMT -5
Something else to think about, maybe, when a pal of mine wanted a heavy arrow for water buffalo, he bought the fine grain salt, I think it was, and filled the arrow shaft with it to add weight. It tends to settle a bit with shooting and takes a bit of fuss to work with - but it does work. If I recall right, it does tend to soften the spine a bit. Just thought I'd mention it.
|
|
|
|
Post by BT on Jan 20, 2009 7:40:45 GMT -5
Thats great Doegirl  Will you have a chance to end the season with this system? |
|
|
|
Post by oldfarmsblueman on Jan 20, 2009 10:37:02 GMT -5
I just read BT'S post by Dr.Mark Timney.History,Marketing and Bowhunting.I think his last remarks state my limited views to a T."But spending your time learning where to shoot an animal and how to shoot well,rather than seeking the Holy Grail of penetration you'll be far better off in the long run" I have to make a content effort to keep from getting sucked into all the new speed and over kill views that for one I am not physically able to do.If I was 35-40 years younger I might. But the reality is I am old, short and weak  .Thats the way it is.I shoot a 26 in. arrow as fast as I can.I will never shoot a 30 in.@ 70 lbs. The only problem I see and I don't even see it as one is needing an extra sight pin to help make up for my arrow that might not fly like a laser beam.I have made a stand with my equipment that SEEMS to be working for me for the moment.I am sticking with my arrows and broad heads untill they show me that I need to make a change.My goal is To build up my strength to shoot every day if possible and to improve my skills at determining distance.I know where to put an arrow!!!!I just have to make sure I can put it there.JMO The only change I see for me this coming year is adding the Firenock.  |
|
|
|
Post by stilllearning on Jan 20, 2009 11:01:38 GMT -5
Oldfarmsblueman I have to agree with you. when you are set up like we are we need to shoot smart. I have said it before placement is the real issue and getting it wrong is not an option.
|
|
|
|
Post by Doegirl on Jan 21, 2009 20:12:25 GMT -5
Oldfarmsblueman I have to agree with you. when you are set up like we are we need to shoot smart. I have said it before placement is the real issue and getting it wrong is not an option. Except, things DO go wrong at times. It's just part of hunting. Yes, we need to be responsible and practice, know our equipment, and make that shot count. On same hand, we have to prepare ourselves for the worst. One of the reasons why I'm interested in experimenting with Ashby's theories is the fact that this man is killing water buffalo with longbows that generate about 10lbs less KE than my 82nd. He's busting through 3/4" inch ribs and splitting the scapulas of stallion zebras. I hit a young buck in the scap last October and was lucky to get 4" of penetration  |
|
|
|
Post by stilllearning on Jan 21, 2009 22:02:39 GMT -5
Oldfarmsblueman I have to agree with you. when you are set up like we are we need to shoot smart. I have said it before placement is the real issue and getting it wrong is not an option. Except, things DO go wrong at times. It's just part of hunting. Yes, we need to be responsible and practice, know our equipment, and make that shot count. On same hand, we have to prepare ourselves for the worst. One of the reasons why I'm interested in experimenting with Ashby's theories is the fact that this man is killing water buffalo with longbows that generate about 10lbs less KE than my 82nd. He's busting through 3/4" inch ribs and splitting the scapulas of stallion zebras. I hit a young buck in the scap last October and was lucky to get 4" of penetration I didn't even get that much penetration with the Innerlock two blades but I can also go away knowing that the deer is alive and well but if I ever get it right and I will, I think I have potential for a pass through. I also hear what you are saying and those mistakes will never completely go away. I hope to get my bow off to BT within the next two weeks so he can set up the bow I will be using. |
|
. I am not sure if this will help but read through the chapters and I found it interesting. I think it does relate to what is being said here. You can also go to the top and start from chapter one.
;D ;D Seriously ... though weight tubes are a good way to play with various options.
.Thats the way
