330 on the Pearson.
The biggest advantage with that bow is the fact that it's a value in todays market and can be ordered direct from the factory
I think you'll find Pearson very competitive this year. Especially when you consider value. I've been very happy with my Pearson this year.
Doegirl, will a 26 inch DL do for you?
See below if so.
It is not listed on their website yet, but Pearson has revamped the TX-4 for 09. (One thing Pearson if VERY bad at is updating their website to reflect their current product line). It is still available with the Z-7 cam as in the past at an IBO of 330, which is the bow I have. Pretty respectable for a single cam, IMO.
However, the TX-4 is now also offered with the new R2B2 binary cam system with IBO of 361.
Richard Batdorf is now with Pearson (from HCA) and this is his system design. Though, of course, there are some contesting this legally, blah, blah, blah. Sounds like there is a three way fight between Pearson, Elite and Athens (?) Archery I think. Whoever it is found to belong to, it works.
Specs:
Axle to axle - 33.5"
Brace Height - 6.25"
Speed - 330 fps IBO w/Z-7 CAM
361 fps IBO w/R2B2 CAM
Draw Lengths - 26-30" R2B2 CAM
26.5"-30.5" Z-7 CAM
Draw weights - 50#, 60#, 70
Let-Off - 75%
Weight - 4.1lbs
They are also offering the Z-34 and Z-32 with the new cam system with IBO's of 342 and 332.
Z34
Specs:
Axle to axle - 33.5"
Brace Height - 7.25"
Speed - 316 fps w/Z-7 cam system
342 fps w/R2B2 cam system
Draw Lengths - 27.5"-31.5"
R2B2 cam 27"-31"
Draw weights - 50#, 60#, 70#
Cam: Z-7 Single Cam
Let-Off - 75%
Weight - 4.1 lbs
Available finish: Realtree APG camo
Z32
Specs:
Axle to axle - 32"
Brace Height - 7.25"
Speed - 316 fps w/Z-7 cam system
332 fps w/R2B2 cam system
Draw Lengths - 27-30.5" Z-7 Cam
26.5"-30" R2B2 cam
Draw weights - 50#, 60#, 70#
Cam: Z-7 Single Cam
Let-Off - 75%
Weight - 4.0 lbs
Available finish: Realtree APG camo
The only place I've been able to see them and read about them is here at Select Archery:
www.selectarchery.com/pearson.shtml
