FlyinCedar
Junior Member
Takin a break on patrol
Posts: 280
|
Post by FlyinCedar on Apr 1, 2006 9:01:44 GMT -5
I have a buddy at work that can only shoot a crossbow due to a shoulder injury, and he told me last night he is having a hard time seeing his bolts with his green and yellow fletching. I told him I could put some white vanes on em for him, but forgot one small detail...ya gotta have a nock receiver for crossbows for the fletching jig. I have a Martin J-8 jig...anyone know where to ge the receiver? Thanx
|
|
|
|
Post by BT on Apr 1, 2006 9:44:49 GMT -5
You got me there  But....If the bolts have removable nock receivers could you remove it and put in a regular nock that is bulked up with masking tape?. Thats what I would try since you only need a way to hold center. |
|
FlyinCedar
Junior Member
Takin a break on patrol
Posts: 280
|
Post by FlyinCedar on Apr 2, 2006 10:59:30 GMT -5
Ok...I know I have seen the insert for my jig, but can't remember where...I may try that..thanx
|
|
|
|
Post by 2chucks2 on Apr 3, 2006 13:02:35 GMT -5
I use a 2219 alum. insert and then I thread in a tapered broadhead adapter with a nock glued to it. Works every time.
|
|
